mr.zeroandClaude Opus 5
72ff17fff6
The desktop engine shares this store root, and both keyed their home by the store id alone — so installing both from the same publisher meant one config.json and one state.json between them, and the second install silently adopted the first one's state. Caught by installing the two side by side. The home is now `<id>-retroarch`. The installer moves an existing `<id>` home on its way past, so an install from yesterday keeps its state and its games; the uninstaller accepts either name. The launcher was already `<id>-retroarch-store`, so nothing the user types changes. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
133 lines
4.8 KiB
Bash
Executable File
133 lines
4.8 KiB
Bash
Executable File
#!/bin/sh
|
|
# Install a WarpEngine store into a RetroArch installation.
|
|
#
|
|
# This installer belongs to the engine, so it takes the store as a parameter:
|
|
# point STORE_CONFIG at a config.json — a local path or a URL — and it sets up
|
|
# that store. A store repository's own install.sh is a short wrapper that
|
|
# supplies its config; see README.
|
|
#
|
|
# STORE_CONFIG=./config.json ./install.sh
|
|
# STORE_CONFIG=https://git.example.org/tools/my-store/raw/branch/master/config.json \
|
|
# curl -fsSL https://git.teletypegames.org/stores/warp-engine-retroarch-store/raw/branch/master/install.sh | sh
|
|
#
|
|
set -eu
|
|
|
|
STORE_ROOT="${STORE_ROOT:-${XDG_DATA_HOME:-$HOME/.local/share}/warp-engine-store}"
|
|
BIN_DIR="${BIN_DIR:-$HOME/.local/bin}"
|
|
ENGINE_RAW_BASE="${ENGINE_RAW_BASE:-https://git.teletypegames.org/stores/warp-engine-retroarch-store/raw/branch/master}"
|
|
# The shared core lives in its own repository, because both store engines use it.
|
|
WARPSTORE_RAW_BASE="${WARPSTORE_RAW_BASE:-https://git.teletypegames.org/engines/warpstore/raw/branch/master}"
|
|
STORE_CONFIG="${STORE_CONFIG:-}"
|
|
# Only set when run as a file; piped from curl "$0" is `bash`, and then the
|
|
# engine has to come from the forge rather than from whatever the cwd holds.
|
|
SRC_DIR=""
|
|
if [ -f "$0" ]; then
|
|
SRC_DIR="$(cd "$(dirname "$0")" && pwd)"
|
|
fi
|
|
|
|
say() { echo "[install] $*"; }
|
|
die() { echo "[install] error: $*" >&2; exit 1; }
|
|
|
|
command -v python3 >/dev/null 2>&1 || die "python3 is required"
|
|
command -v curl >/dev/null 2>&1 || die "curl is required"
|
|
[ -n "$STORE_CONFIG" ] || die "STORE_CONFIG is required (path or URL of a store config.json)"
|
|
|
|
fetch() { # fetch <source> <dest>; source may be a local path or a URL
|
|
case "$1" in
|
|
http://*|https://*) curl -fsSL "$1" -o "$2" ;;
|
|
*) [ -f "$1" ] || die "no such file: $1"; cp "$1" "$2" ;;
|
|
esac
|
|
}
|
|
|
|
# Stage the config first: the store id in it decides where everything lands.
|
|
TMP_CFG="$(mktemp)"
|
|
trap 'rm -f "$TMP_CFG"' EXIT
|
|
say "reading store config from $STORE_CONFIG"
|
|
fetch "$STORE_CONFIG" "$TMP_CFG"
|
|
|
|
STORE_META="$(python3 -c '
|
|
import json, sys
|
|
cfg = json.load(open(sys.argv[1])).get("store") or {}
|
|
sid = cfg.get("id") or ""
|
|
if not sid or "/" in sid:
|
|
sys.exit("store.id is required and must not contain a slash")
|
|
print(sid, cfg.get("name") or sid)
|
|
' "$TMP_CFG")" || die "cannot read $STORE_CONFIG"
|
|
|
|
STORE_ID="${STORE_META%% *}"
|
|
STORE_NAME="${STORE_META#* }"
|
|
|
|
# One home per engine: the desktop store shares this root, and a shared home
|
|
# would mean a shared config.json and state.json.
|
|
STORE_HOME="$STORE_ROOT/$STORE_ID-retroarch"
|
|
LAUNCHER="$BIN_DIR/$STORE_ID-retroarch-store"
|
|
|
|
# Installs from before the rename kept the home under the bare store id.
|
|
LEGACY_HOME="$STORE_ROOT/$STORE_ID"
|
|
if [ -d "$LEGACY_HOME" ] && [ -f "$LEGACY_HOME/retroarch_store.py" ] && [ ! -d "$STORE_HOME" ]; then
|
|
say "moving $LEGACY_HOME -> $STORE_HOME (one home per engine)"
|
|
mv "$LEGACY_HOME" "$STORE_HOME"
|
|
fi
|
|
|
|
mkdir -p "$STORE_HOME" "$BIN_DIR"
|
|
|
|
install_file() { # install_file <name> <raw base> [local override]
|
|
if [ -n "${3:-}" ] && [ -f "${3:-}" ]; then
|
|
say "installing $1 from ${3}"
|
|
install -m 0755 "$3" "$STORE_HOME/$1"
|
|
elif [ -n "$SRC_DIR" ] && [ -f "$SRC_DIR/$1" ]; then
|
|
say "installing $1 from $SRC_DIR"
|
|
install -m 0755 "$SRC_DIR/$1" "$STORE_HOME/$1"
|
|
else
|
|
say "downloading $1 from $2"
|
|
curl -fsSL "$2/$1" -o "$STORE_HOME/$1"
|
|
chmod 0755 "$STORE_HOME/$1"
|
|
fi
|
|
}
|
|
|
|
install_file retroarch_store.py "$ENGINE_RAW_BASE"
|
|
install_file warpstore.py "$WARPSTORE_RAW_BASE" "${WARPSTORE_SRC:-}"
|
|
|
|
# The config is the store's identity, so it is always refreshed; state.json,
|
|
# catalog.json and the log stay put, which makes re-running the upgrade path.
|
|
if [ -f "$STORE_HOME/config.json" ]; then
|
|
say "updating $STORE_HOME/config.json (previous copy kept as config.json.bak)"
|
|
cp "$STORE_HOME/config.json" "$STORE_HOME/config.json.bak"
|
|
fi
|
|
install -m 0644 "$TMP_CFG" "$STORE_HOME/config.json"
|
|
|
|
# A short launcher so the CLI is one path, not a python invocation.
|
|
cat > "$LAUNCHER" <<EOF
|
|
#!/bin/bash
|
|
# $STORE_NAME — CLI wrapper around the shared RetroArch store engine.
|
|
export RETROARCH_STORE_HOME="$STORE_HOME"
|
|
exec "$STORE_HOME/retroarch_store.py" --config "$STORE_HOME/config.json" "\$@"
|
|
EOF
|
|
chmod 0755 "$LAUNCHER"
|
|
|
|
say "resolved paths:"
|
|
"$LAUNCHER" paths 2>&1 | sed 's/^/ /' || true
|
|
|
|
if [ "${STORE_SKIP_SYNC:-0}" != "1" ]; then
|
|
say "running the first sync"
|
|
"$LAUNCHER" --verbose sync || say "the first sync did not finish — see the message above"
|
|
fi
|
|
|
|
case ":$PATH:" in
|
|
*":$BIN_DIR:"*) ;;
|
|
*) say "note: $BIN_DIR is not on your PATH" ;;
|
|
esac
|
|
|
|
cat <<EOF
|
|
|
|
[install] done.
|
|
|
|
CLI: $LAUNCHER list|sync|remove|export|paths|config
|
|
Config: $STORE_HOME/config.json
|
|
|
|
Restart RetroArch to see the playlists — it builds its menu at startup.
|
|
|
|
Keep it up to date by running the sync on a schedule, e.g. in crontab:
|
|
0 * * * * $LAUNCHER sync >>$STORE_HOME/store.log 2>&1
|
|
EOF
|